Honda 2005-2008 RX500 FA Service Manual page 225

'61HN252' by American Honda Motor Co. - Page 225 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Install the starter driven pulley aligning the bosses
with the grooves in the crankshaft.
Coat a new O-ring with oil and install it onto the
driven pulley bolt.
Apply oil to the driven pulley bolt threads and seat-
ing surface, and install the bolt.
Hold the starter driven pulley using the special tool
and tighten the bolt.
TOOL:
Recoil pulley holder 07SMB-HM70100
TORQUE: 108 N·m (11.0 kgf·m, 80 lbf·ft)
Install the recoil starter (page 11-5).
Route the wires and hoses properly (page 1-22).
Connect the alternator 5P connector and install it
onto the stay.
Install the following:
swingarm (page 15-9)
air cleaner housing (page 5-5)
Check the oil level and add the recommended oil if
necessary (page 3-12).
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ALTERNATOR/STARTER CLUTCH
DRIVEN PULLEY
O-RING
RECOIL PULLEY HOLDER
ALTERNATOR
5P CONNECTOR
Align
DRIVEN PULLEY
BOLT
11-11
3/9/2008 10:56 PM