Honda 2005-2008 RX500 FA Service Manual page 105

'61HN252' by American Honda Motor Co. - Page 105 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Install the oil tank onto the front crankcase cover
and tighten the five bolts securely.
Coat new O-rings with oil and install them onto the
oil pipes.
Install the oil pipes into the oil tank and tighten the
bolts securely.
Install the engine oil temperature (EOT) sensor with
a new sealing washer and tighten it.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Connect the EOT sensor connector.
Install the inner fender (page 2-9) and front mud
guard (page 2-8).
FOR SCAVENGE PUMPS:
Remove the rear crankcase cover (page 12-6).
Remove the bolt and oil strainer for the sub-scav-
enge pump.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
BOLTS
OIL TANK
BOLT
OIL PIPE
OIL STRAINER (SUB-SCAVENGE)
LUBRICATION SYSTEM
O-RINGS
BOLT
SEALING WASHER
EOT SENSOR
BOLT
4-11
3/9/2008 10:43 PM