Honda 2005-2008 RX500 FA Service Manual page 160

'61HN252' by American Honda Motor Co. - Page 160 of 540
[2005-2008] [TRX500 FA/FGA]
ENGINE REMOVAL/INSTALLATION
7-10
1 of 1
Connect the engine coolant temperature (ECT) sen-
sor connector.
Connect the upper and lower radiator hose to the
thermostat cover and water pump.
Tighten the hose band screws securely.
Install the spark plug cap onto the plug.
Connect the following:
alternator/ignition pulse generator connector
gear position switch connector
Install the connectors onto the stays and clamp the
wires and hoses properly (page 1-22).
Install the gearshift arm onto the gearshift spindle,
aligning the groove in the arm with the wide tooth
on the spindle.
Install and tighten the pinch bolt.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
RADIATOR HOSES
SPARK PLUG CAP
GEAR POSITION
SWITCH CONNECTOR
ALTERNATOR/IGNITION PULSE
GENERATOR CONNECTOR
GEARSHIFT ARM
ECT SENSOR
CONNECTOR
Align
PINCH BOLT
3/9/2008 10:49 PM