Honda 2005-2008 RX500 FA Service Manual page 227

'61HN252' by American Honda Motor Co. - Page 227 of 540
[2005-2008] [TRX500 FA/FGA]
1 of 1
Hold the flywheel with the special tool and remove
the starter clutch bolts.
TOOL:
Flywheel holder 07725-0040000 or
equivalent commer-
cially available in U.S.A.
Remove the starter clutch assembly from the fly-
wheel.
Remove the sprag clutch from the starter clutch
outer.
Check the starter clutch outer and sprag clutch for
abnormal wear or damage.
Check the starter driven gear teeth and needle bear-
ing for wear or damage.
Measure the starter driven gear boss O.D.
SERVICE LIMIT: 51.705 mm (2.0356 in)
STARTER CLUTCH ASSEMBLY
Lubricate the sprag clutch with oil and install it into
the starter clutch outer with the flange side facing
the flywheel side.
http://services.honda.com/ServiceManual/SVC_MNL/61HN253/61HN2...
ALTERNATOR/STARTER CLUTCH
STARTER CLUTCH BOLTS
FLYWHEEL HOLDER
CLUTCH OUTER
CLUTCH OUTER
SPRAG CLUTCH
SPRAG CLUTCH
11-13
3/9/2008 10:56 PM