Show Ip Bgp Ipv6 Unicast Peer-Group - Dell C9000 Series Reference Manual

dampened-routes
detail
flap-statistics
routes
Command Modes
Command History
Version
9.9(0.0)
9.2(1.0)
8.2.1.0
7.4.1.0
Related show ip bgp
Commands

show ip bgp ipv6 unicast peer-group

Allows you to view information on the BGP peers in a peer group.
C9000 Series
Syntax
show ip bgp ipv6 unicast peer-group [peer-group-name [summary]]
Parameters
peer-group-name
detail
summary
Command Modes
(OPTIONAL) Enter the keywords dampened-routes to view
information on dampened routes from the BGP neighbor.
(OPTIONAL) Enter the keyword detail to view neighbor-
specific internal information for the IPv6 address family.
(OPTIONAL) Enter the keywords flap-statistics to view flap
statistics on the neighbor's routes.
(OPTIONAL) Enter the keyword routes to view only the
neighbor's feasible routes.
• EXEC
• EXEC Privilege
Description
Introduced on the C9010.
Introduced on the Z9500.
Introduced on the E-Series ExaScale.
Introduced
– view the current BGP routing table.
(OPTIONAL) Enter the name of a peer group to view information
about that peer group only.
(OPTIONAL) Enter the keyword detail to view peer-group-
specific information for the IPv6 address family.
(OPTIONAL) Enter the keyword summary to view status
information of the peers in that peer group. The output is the
same as that found in show ip bgp summary command
• EXEC
• EXEC Privilege
Border Gateway Protocol 638