Show Ip Mroute Group - Dell Networking 2024 Reference Manual

Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
console#show ip mroute
Source IP Group IP
--------------- --------------- -------- ----------- --------------- -----
192.168.0.11 239.0.5.7

show ip mroute group

Use the show ip mroute group command in Privileged EXEC mode to display
the multicast configuration settings such as flags, timer settings, incoming
and outgoing interfaces, RPF neighboring routers, and expiration times of all
the entries in the multicast mroute table containing the
Syntax
show ip mroute group
groupipaddr — IP address of the multicast group.
•
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Multicast route table
Expiry
(mm:ss)
3:03
groupipaddr
[summary]
Up Time
(hh:mm:ss) RPF Neighbor
15:54:12 192.168.0.10
Multicast Commands
Flags
groupipaddr
value.
1155