Show Mac-Address-Table Count - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show mac-address-table count

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show mac-address-table count
To display the number of entries currently in the MAC address table, use the show mac-address-table
count command.
Syntax Description address
EEEE.EEEE.EEEE
dynamic
static
interface type slot/port |
port-channel number
vlan vlan-id
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the number of dynamic entries currently in the MAC address table:
switch# show mac-address-table count dynamic
Related Commands Command
show
mac-address-table
Cisco Nexus 5000 Series Command Reference
3-10
show mac-address-table count [address EEEE.EEEE.EEEE] [dynamic | static] [interface {type
slot/port | port-channel number}] [vlan vlan-id]
(Optional) Displays a count of the MAC address table entries for a specific
address.
(Optional) Displays a count of the dynamic MAC addresses.
(Optional) Displays a count of the static MAC addresses.
(Optional) Specifies the interface. Use either the type of interface, the slot
number, and the port number, or the EtherChannel number.
(Optional) Displays information for a specific VLAN; the range of valid
values is from 1 to 4094.
Modification
This command was introduced.
Description
Displays information about the MAC address table.
Chapter 3 Ethernet Show Commands
OL-16599-01