Show Spanning-Tree Bridge - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show spanning-tree bridge

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show spanning-tree bridge
To display status and configuration of the local bridge, use the show spanning-tree bridge command.
Syntax Description address
brief
detail
forward-time
hello-time
id
max-age
priority
system-id
protocol
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows display STP information for the bridge:
switch# show spanning-tree bridge
Related Commands Command
show spanning-tree
show spanning-tree
active
show spanning-tree
brief
Cisco Nexus 5000 Series Command Reference
3-22
show spanning-tree bridge [address | brief | detail | forward-time | hello-time | id | max-age |
priority [system-id] | protocol]
(Optional) Displays the MAC address for the STP local bridge.
(Optional) Displays a brief summary of the status and configuration for the
STP bridge.
(Optional) Displays a detailed summary of the status and configuration for
the STP bridge.
(Optional) Displays the STP forward delay interval for the bridge.
(Optional) Displays the STP hello time for the bridge.
(Optional) Displays the STP bridge identifier for the bridge.
(Optional) Displays the STP maximum-aging time for the bridge.
(Optional) Displays the bridge priority for this bridge.
(Optional) Displays the bridge priority with the system ID extension for this
bridge.
(Optional) Displays whether the Rapid PVST+ or MST protocol is active.
Modification
This command was introduced.
Description
Displays information STP.
Displays information about STP active interfaces only.
Displays brief summary information about STP.
Chapter 3 Ethernet Show Commands
OL-16599-01