Show Spanning-Tree Brief - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show spanning-tree brief

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show spanning-tree brief
To display a brief summary of the STP status and configuration on the switch, use the show
spanning-tree brief command.
Syntax Description active
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display a brief summary of STP information:
switch(config)# show spanning-tree brief
Related Commands Command
show spanning-tree
show spanning-tree
active
show spanning-tree
bridge
show spanning-tree
detail
show spanning-tree
interface
show spanning-tree
mst
show spanning-tree
root
show spanning-tree
summary
show spanning-tree
vlan
Cisco Nexus 5000 Series Command Reference
3-24
show spanning-tree brief [active]
(Optional) Displays information about STP active interfaces only.
Modification
This command was introduced.
Description
Displays information STP.
Displays information about STP active interfaces only.
Displays bridge ID, timers, and protocol for the local bridge on the switch.
Displays detailed information about STP.
Displays STP interface status and configuration of specified interfaces.
Displays information about MST STP.
Displays status and configuration of the root bridge for the STP instance to
which this switch belongs.
Displays summary information about STP.
Displays STP information for specified VLANs.
Chapter 3 Ethernet Show Commands
OL-16599-01