Parity - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

parity

To configure the parity for the console port, use the parity command. To revert to the default, use the no
form of this command.
Syntax Description
even
none
odd
Command Default The none keyword is the default.
Command Modes
Terminal line configuration
Command History Release
4.0(0)N1(1a)
Usage Guidelines You can configure the console port only from a session on the console port.
Examples
This example shows how to configure the parity for the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# parity even
This example shows how to revert to the default parity for the console port:
switch# configure terminal
switch(config)# line console
switch(config-console)# no parity even
Related Commands Command
show line
OL-16599-01
parity {even | none | odd}
no parity {even | none | odd}
Specifies even parity.
Specifies no parity.
Specifies odd parity.
Modification
This command was introduced.
Description
Displays information about the console port configuration.
Cisco Nexus 5000 Series Command Reference
parity
1-61