Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual page 612

fcroute
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
The following example specifies the Fibre Channel interface, the route for the domain of the next hop
switch, and the cost of the route for VSAN 1:
switch(config)# fcroute 0x031211 interface fc1/1 domain 3 metric 1 vsan 1
The following example specifies the Fibre Channel interface, the route for the domain of the next hop
switch, the cost of the route, and configures the static route for a destination switch remotely connected
for VSAN 3:
switch(config)# fcroute 0x111112 interface fc3/1 domain 3 metric 3 remote vsan 3
Related Commands Command
show fcroute
fcroute-map
show fcroute-map
fcroute policy
fcroute-map
Cisco Nexus 5000 Series Command Reference
8-64
Description
Displays Fibre Channel routes.
Specifies a preferred path Fibre Channel route map.
Displays the preferred path route map configuration and status.
Activates the preferred path Fibre Channel route map.
Chapter 8 Fibre Channel Commands
OL-16599-01