Show Fcroute - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fcroute

Use the show fcroute command to view specific information about existing Fibre Channel and FSPF
configurations.
Syntax Description distance
label
label
vsan vsan-id
multicast
fc-id
summary
unicast
host
fc-mask
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines When the number of routes are displayed in the command output, both visible and hidden routes are
included in the total number of routes.
Examples The following example displays administrative distance:
switch# show fcroute distance
The following example displays multicast routing information:
switch# show fcroute multicast
The following example displays FCID information for a specified VSAN:
switch# show fcroute multicast vsan 3
OL-16599-01
show fcroute {distance | label [label] vsan vsan-id | multicast [fc-id vsan vsan-id | vsan vsan-id]
| summary [vsan vsan-id] | unicast [[host] fc-id fc-mask vsan vsan-id | vsan vsan-id]}
Displays FC route preference.
Displays label routes.
(Optional) Displays label routes for the specified label.
(Optional) Specifies the ID of the VSAN (from 1 to 4093).
Displays FC multicast routes.
(Optional) Specifies the Fibre Channel ID.
Displays the FC routes summary.
Displays FC unicast routes.
Displays unicast routes for the specified host.
Displays unicast routes for hosts that match the range of FC IDs that is
specified by the mask.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show fcroute
9-21