Show Mac Address-Table Count - Cisco Catalyst 3560-X Command Reference Manual

show mac address-table count

show mac address-table count
Syntax Description
Command Modes
Command History
Usage Guidelines
Examples
Catalyst 3750-X and 3560-X Switch Command Reference
2-674
Downloaded from www.Manualslib.com
Use the show mac address-table count user EXEC command to display the number of addresses present
in all VLANs or the specified VLAN.
show mac address-table count [vlan vlan-id] [ | {begin | exclude | include} expression]
vlan vlan-id (Optional) Display the number of addresses for a specific VLAN. The range is 1
to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
User EXEC
Release Modification
12.2(53)SE2 This command was introduced.
If no VLAN number is specified, the address count for all VLANs appears.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
This is an example of output from the show mac address-table count command:
Switch# show mac address-table count
Mac Entries for Vlan : 1
---------------------------
Dynamic Address Count : 2
Static Address Count : 0
Total Mac Addresses : 2
manuals search engine
Chapter 2 Catalyst 3750-X and 3560-X Cisco IOS Commands
OL-21522-02