Chapter 1
Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
setup
To enter the basic device setup dialog, use the setup command.
Syntax Description
ficon
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
The setup script uses the factory-default values, not the values that you have configured. You can exit
the dialog at any point by pressing Ctrl-C.
Examples
This example shows how to enter the basic device setup script:
switch# setup
Related Commands
Command
show running-config
OL-16599-01
setup [ficon]
(Optional) Runs the basic ficon setup command facility.
Modification
This command was introduced.
Description
Displays the running configuration.
Cisco Nexus 5000 Series Command Reference
setup
1-71