Show Npv Status - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show npv status

To display the N port virtualization (NPV) current status, use the show npv status command.
Syntax Description
This command has no other keywords or arguments.
Command Default
None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines
The show npv status command is available only when the switch is in NPV mode.
Examples The following example displays the current status of NPV:
switch# show npv status
Related Commands Command
show npv flogi-table
OL-16599-01
show npv status
Modification
This command was introduced.
Description
Displays the information about NPV FLOGI session.
Cisco Nexus 5000 Series Command Reference
show npv status
9-35