Show Port-Security - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show port-security

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show port-security
To display configured port security feature information, use the show port-security command.
Syntax Description database
active
vsan vsan-id
fwwn fwwn-id
interface
fc slot/port
san-port-channel port
pending
pending-diff
session status
statistics
status
violations
last count
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines The access information for each port can be individually displayed. If you specify the fabric world wide
name (fWWN) or interface options, all devices that are paired in the active database (at that point) with
the given fWWN or the interface are displayed.
When you enter the show port-security command with the last number option, only the specified
number of entries that appear first are displayed.
Cisco Nexus 5000 Series Command Reference
9-38
show port-security {database [active [vsan vsan-id]] | fwwn fwwn-id vsan vsan-id | interface {fc
slot/port | san-port-channel port} vsan vsan-id | vsan vsan-id] | pending [vsan vsan-id] |
pending-diff [vsan vsan-id] | session status [vsan vsan-id] | statistics [vsan vsan-id] | status
[vsan vsan-id] | violations [last count | vsan vsan-id]}
Displays database-related port security information.
(Optional) Displays the activated database information.
(Optional) Displays information for the specified database.
Displays information for the specified fabric WWN.
Displays information for an interface.
Displays information for the specified Fibre Channel interface.
Displays information for the specified SAN port channel interface. The
range is 1 to 128.
Displays the server address pending configuration.
Displays the server address pending configuration differences with the active
configuration.
Displays the port security session status on a per VSAN basis.
Displays port security statistics.
Displays the port security status on a per VSAN basis.
Displays violations in the port security database.
(Optional) Displays the last number of lines in the database. The range is 1
to 100.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01