Show Mac-Address-Table Count - Cisco Catalyst 4500 Series Command Reference Manual

Chapter 2 Cisco IOS Commands for the Catalyst 4500 Series Switches

show mac-address-table count

To display the number of entries currently in the MAC address table, use the show mac-address-table
count command.
Syntax Description
vlan vlan_id
Defaults
This command has no default settings.
Command Modes Privileged EXEC mode
Command History Release
12.1(8a)EW
12.1(12c)EW
Examples This example shows how to display the entry count for a specific VLAN:
Switch# show mac-address-table count vlan 1
MAC Entries for Vlan 1:
Dynamic Unicast Address Count:
Static Unicast Address (User-defined) Count:
Static Unicast Address (System-defined) Count: 1
Total Unicast MAC Addresses In Use:
Total Unicast MAC Addresses Available:
Multicast MAC Address Count:
Total Multicast MAC Addresses Available:
Switch#
Related Commands Command
show mac-address-table address
show mac-address-table aging-time
show mac-address-table dynamic
show mac-address-table interface
show mac-address-table multicast
show mac-address-table protocol
OL-25342 -01
show mac-address-table count [vlan vlan_id]
(Optional) Specifies a VLAN; valid values are from 1 to 4094.
Modification
Support for this command was introduced on the Catalyst 4500 series switch.
Added support for extended VLAN addresses.
Catalyst 4500 Series Switch Cisco IOS Command Reference—Release IOS XE 3.3.0SG and IOS 15.1(1)SG)
0
0
1
32768
1
16384
Description
Displays the information about the MAC-address table.
Displays MAC address table aging information.
Displays the dynamic MAC address table entries only.
Displays the MAC address table information for a specific
interface.
Displays information about the multicast MAC address
table.
Displays the MAC address table information that is based
on the protocol.
show mac-address-table count
2-787