Chapter 6
Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
role feature-group name
To create or specify a user role feature group and enter user role feature group configuration mode, use
the role feature-group name command. To delete a user role feature group, use the no form of this
command.
Syntax Description
group-name
Command Default
None
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Examples
This example shows how to create a user role feature group and enter user role feature group
configuration mode:
switch(config)# role feature-group name MyGroup
switch(config-role-featuregrp)#
This example shows how to remove a user role feature group:
switch(config)# no role feature-group name MyGroup
Related Commands
Command
feature-group name
show role
feature-group
OL-16599-01
role feature-group name group-name
no role feature-group name group-name
User role feature group name. The group-name has a maximum length of 32
characters and is a case-sensitive, alphanumeric character string.
Modification
This command was introduced.
Description
Specifies or creates a user role feature group and enters user role feature
group configuration mode.
Displays the user role feature groups.
Cisco Nexus 5000 Series Command Reference
role feature-group name
6-91