Fcs Plat-Check-Global - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

fcs plat-check-global

To enable FCS platform and node-name checking fabric wide, use the fcs plat-check-global command.
To disable this feature, use the no form of the command.
Syntax Description
vsan vsan-id
Command Default None
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples The following example shows how to enable FCS platform and node-name checking fabric wide:
switch(config)# fcs plat-check-global vsan 2
Related Commands Command
show fcs
OL-16599-01
fcs plat-check-global vsan vsan-id
no fcs plat-check-global vsan vsan-id
Specifies the VSAN ID for platform checking, which is from 1 to 4096.
Modification
This command was introduced.
Description
Displays fabric configuration server information.
Cisco Nexus 5000 Series Command Reference
fcs plat-check-global
8-65