Interface Policy Deny - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

interface policy deny

To enter interface policy configuration mode for a user role, use the interface policy deny command.
To revert to the default interface policy for a user role, use the no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default All interfaces
Command Modes User role configuration
Command History Release
4.0(0)N1(1a)
Examples This example shows how to enter interface policy configuration mode for a user role:
switch(config)# role name MyRole
switch(config-role)# interface policy deny
switch(config-role-interface)#
This example shows how to revert to the default interface policy for a user role:
switch(config)# role name MyRole
switch(config-role)# no interface policy deny
Related Commands Command
role name
show role
OL-16599-01
interface policy deny
no interface policy deny
Modification
This command was introduced.
Description
Creates or specifies a user role and enters user role configuration mode.
Displays user role information.
Cisco Nexus 5000 Series Command Reference
interface policy deny
6-39