Telnet Server Enable - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

telnet server enable

To enable the Telnet server, use the telnet server enable command. To disable the Telnet server, use the
no form of this command.
Syntax Description
This command has no arguments or keywords.
Command Default Enable.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to enable the Telnet server:
switch(config)# telnet server enable
This example shows how to disable the Telnet server:
switch(config)# no telnet server enable
Related Commands Command
show telnet server
OL-16599-01
telnet server enable
no telnet server enable
Modification
This command was introduced.
Description
Displays the Telnet server status.
Cisco Nexus 5000 Series Command Reference
telnet server enable
6-141