Zone Copy - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

zone copy

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
zone copy
To copy the active zone set to the full zone set, use the zone copy command. Use the no form of the
command to negate the command or revert to the factory defaults.
Syntax Description
active-zoneset
full-zoneset
vsan vsan-id
bootflash:
ftp:
scp:
sftp:
slot0:
tftp:
volatile:
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
The following example copies the active zone set to the full zone set:
switch# zone copy active-zoneset full-zoneset vsan 1
The following example copies the active zone set in VSAN 3 to a remote location using SCP:
switch# zone copy vsan 3 active-zoneset scp://guest@myserver/tmp/active_zoneset.txt
Related Commands Command
show zone
Cisco Nexus 5000 Series Command Reference
8-148
zone copy active-zoneset full-zoneset [include-auto-zones] vsan vsan-id
zone copy vsan vsan-id active-zoneset {bootflash: | ftp: | full-zoneset | scp: | sftp: | tftp: |
volatile:}
no zone copy
Copies from the active zone set.
Copies the active zone set to the full-zone set.
Configures to copy active zone set on a VSAN to full zone set. The ID of the
VSAN is from 1 to 4093.
Copies the active zone set to a location in the bootflash: directory.
Copies the active zone set to a remote location using the FTP protocol.
Copies the active zone set to a remote location using the SCP protocol.
Copies the active zone set to a remote location using the SFTP protocol.
Copies the active zone set to a location in the slot0: directory.
Copies the active zone set to a remote location using the TFTP protocol.
Copies the active zone set to a location in the volatile: directory.
Modification
This command was introduced.
Description
Displays zone information.
Chapter 8 Fibre Channel Commands
OL-16599-01