show wwn
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show wwn
To display the status of the WWN configuration, use the show wwn command.
Syntax Description
status
block-id number
switch
vsan-wwn
Command Default
None
Command Modes
EXEC mode.
Command History
Release
4.0(0)N1(1a)
Examples
The following example displays the WWN of the switch:
switch# show wwn switch
The following example displays a user-configured VSAN WWN:
switch# show wwn vsan-wwn
Cisco Nexus 5000 Series Command Reference
9-50
show wwn {status [block-id number] | switch | vsan-wwn}
Displays a summary of WWN usage and alarm status.
(Optional) Displays WWN usage and alarm status for a block ID. The range
is 34 to 1793.
Displays switch WWN.
Displays all user-configured VSAN WWNs.
Modification
This command was introduced.
Chapter 9
Fibre Channel Show Commands
OL-16599-01