Show Interface Mac-Address - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show interface mac-address

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show interface mac-address
To display the information about the MAC address, use the show interface mac-address command.
Syntax Description
type slot/port
Command Default
None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
If you do not specify an interface, the system displays all the MAC addresses.
Examples
This example shows how to display the information on MAC addresses for the entire switch:
switch# show interface mac-address
Related Commands Command
mac-address-table
static
show
mac-address-table
Cisco Nexus 5000 Series Command Reference
3-2
show interface [type slot/port] mac-address
(Optional) Specifies the interface for which MAC addresses should be
displayed. The type can be either ethernet. Specify the appropriate slot or
virtual interface group number and port number.
Modification
This command was introduced.
Description
Adds static entries to the MAC address table or configures a static MAC
address with IGMP snooping disabled for that address.
Displays information on the MAC address table.
Chapter 3 Ethernet Show Commands
OL-16599-01