Show Vpc Orphan-Ports - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

show vpc orphan-ports

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show vpc orphan-ports

To display ports that are not part of the virtual port channel (vPC) but have common VLANs, use the

show vpc orphan-ports command.

Syntax Description

This command has no arguments or keywords.

Command Modes

Any command mode.

Command History

Usage Guidelines

The show vpc orphan-ports command displays those ports that are not part of the vPC but that share

common VLANs with ports that are part of the vPC.

This command is not available if you have not enabled the vPC feature. See feature vpc for information

on enabling vPCs.

This command does not require a license.

This example shows how to display vPC orphan ports:

switch(config)# show vpc orphan ports

--------::Going through port database. Please be patient.::--------

Cisco Nexus 5000 Series Command Reference

show vpc orphan-ports

Modification

This command was introduced.

Orphan Ports

-------------------------

Vpc Commands