Show Fcdroplatency - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show fcdroplatency

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show fcdroplatency
To display the configured Fibre Channel latency parameters, use the show fcdroplatency command.
Syntax Description
network
switch
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays the configured Fibre Channel latency parameters:
switch# show fcdroplatency
Cisco Nexus 5000 Series Command Reference
9-14
show fcdroplatency [network | switch]
(Optional) Network latency in milliseconds.
(Optional) Switch latency in milliseconds.
Modification
This command was introduced.
Chapter 9 Fibre Channel Show Commands
OL-16599-01