Show Startup-Config Radius - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 6 Security Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show startup-config radius

To display RADIUS configuration information in the startup configuration, use the show startup-config
radius command.
Syntax Description This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the RADIUS information in the startup configuration:
switch# show startup-config radius
OL-16599-01
show startup-config radius
Modification
This command was introduced.
show startup-config radius
Cisco Nexus 5000 Series Command Reference
6-117