Show Fcns Database - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fcns database

To display the results of the discovery, or to display the name server database for a specified VSAN or
for all VSANs, use the show fcns database command.
Syntax Description detail
vsan vsan-id
domain domain-id
detail
fcid fcid-id
local
Command Default None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines The discovery can take several minutes to complete, especially if the fabric is large or if several devices
are slow to respond.
Virtual enclosure ports can be viewed using the show fcns database command.
Examples
The following example displays the contents of the FCNS database:
switch# show fcns database
The following example displays the detailed contents of the FCNS database:
switch# show fcns database detail
The following example displays the management VSAN (VSAN 2):
switch# show fcns database vsan 2
The following example displays the database for all configured VSANs:
switch# show fcns database
OL-16599-01
show fcns database {detail [vsan vsan-id] | domain domain-id [detail] [vsan vsan-range] | fcid
fcid-id [detail] vsan vsan-range | local [detail] [vsan vsan-range] | vsan vsan-id}
Displays all objects in each entry.
(Optional) Displays entries for a specified VSAN ID. The range is 1 to 4093.
Displays entries in a domain.
(Optional) Displays detailed entries for the domain.
Displays entry for the given port.
Displays local entries.
Modification
This command was introduced.
Cisco Nexus 5000 Series Command Reference
show fcns database
9-17