Match Class-Map - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

match class-map

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
match class-map
To match on the match commands in a specified class map, use the match class-map command in the
class map configuration mode. To remove the match on the specified class map, use the no form of this
command.
Syntax Description
not
class-map-name
Defaults None
Command Modes Class-map type qos configuration
Command History Release
4.1(3)N1(1)
Usage Guidelines This command does not require a license.
Examples This example shows how to match on the matches specified in class map named my_test:
switch(config)# class-map my_test
switch(config-cmap-qos)# match class-name my_test
Related Commands Command
show class-map
Cisco Nexus 5000 Series Command Reference
5-6
match [not] class-map class-map-name
no match [not] class-map class-map-name
(Optional) Negates the specified match result.
Matches on the match commands in the specified class-map name.
Modification
This command was introduced.
Description
Displays class maps.
Chapter 5 Quality of Service Commands
OL-16599-01