Zoneset (Exec Mode) - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

zoneset (EXEC mode)

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
zoneset (EXEC mode)
To merge zone set databases, use the zoneset command.
Syntax Description distribute
export
import
interface
fc slot/port
san-port-channel
port-number
vsan vsan-id
Command Default
None
Command Modes
EXEC mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines
You can also enter the zoneset import and the zoneset export commands for a range of VSANs.
The zoneset distribute vsan vsan-id command is supported in interop 2 and interop 3 modes, and not
in interop 1 mode.
Examples
The following example imports the zone set database from the adjacent switch connected through the
VSAN 2 interface:
switch# zoneset import interface fc2/3 vsan 2
The following example exports the zone set database to the adjacent switch connected through VSAN 5:
switch# zoneset export vsan 5
Cisco Nexus 5000 Series Command Reference
8-158
zoneset {distribute | export | import interface {fc slot/port | san-port-channel port-number}}
vsan vsan-id
Distributes the full zone set in the fabric.
Exports the zone set database to the adjacent switch on the specified VSAN.
The active zone set in this switch becomes the activated zone set of the
merged SAN.
Imports the zone set database to the adjacent switch on the specified
interface. The active zone set in the adjacent switch becomes the activated
zone set of the merged SAN.
Configures the interface.
Configures a Fibre Channel interface for the specified slot number and port
number.
Specifies SAN port channel interface.
Merges the zone set database of a VSAN on the specified interface. The ID
of the VSAN is from 1 to 4093.
Modification
This command was introduced.
Chapter 8 Fibre Channel Commands
OL-16599-01