Chapter 1
Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show system cores
To display the core filename, use the show system cores command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
EXEC mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
Use the system cores command to configure the system core filename.
Examples
This example shows how to display destination information for the system core files:
switch# show system cores
Related Commands
Command
system cores
OL-16599-01
show system cores
Modification
This command was introduced.
Description
Configures the system core filename.
Cisco Nexus 5000 Series Command Reference
show system cores
1-105