Chapter 8
Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
in-order-guarantee
To enable in-order delivery, use the in-order-guarantee command. To disable in-order delivery, use the
no form of the command.
Syntax Description
vsan vsan-id
[,] [-]
Command Default
Disabled.
Command Modes
Configuration mode
Command History
Release
4.0(0)N1(1a)
Usage Guidelines
In-order delivery of data frames guarantees frame delivery to a destination in the same order that they
were sent by the originator.
Examples
The following example shows how to enable in-order delivery for the entire switch:
switch(config) # in-order-guarantee
The following example shows how to disable in-order delivery for the entire switch:
switch(config)# no in-order-guarantee
The following example shows how to enable in-order delivery for a specific VSAN:
switch(config)# in-order-guarantee vsan 3452
The following example shows how to disable in-order delivery for a specific VSAN:
switch(config)# no in-order-guarantee vsan 101
Related Commands
Command
show
in-order-guarantee
OL-16599-01
in-order-guarantee [vsan vsan-id]
no in-order-guarantee [vsan vsan-id] [,] [-]
Specifies a VSAN ID. The range is 1 to 4093.
(Optional) Allows you to enter multiple VSANs separated by commas, or a
range of VSANs separated by a dash.
Modification
This command was introduced.
Description
Displays the in-order-guarantee status.
Cisco Nexus 5000 Series Command Reference
in-order-guarantee
8-89