Show Startup-Config Vpc - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 10 Vpc Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show startup-config vpc

To display virtual port-channel (vPC) configuration information in the startup-configuration, use the
show startup-config vpc command.
Syntax Description[ all
Defaults
None
Command Modes Any command mode.
Command History Release
4.1(3)N1(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the vPC information in the startup configuration:
switch(config)# show startup-config vpc
version 4.1(2)
feature vpc
vpc domain 1
interface port-channel10
vpc peer-link
interface port-channel20
vpc 100
Related Commands Command
show vpc brief
OL-16599-01
show startup-config vpc [all]
(Optional) Displays startup-configuration information for all vPCs.
Modification
This command was introduced.
Description
Displays information about vPCs. If the feature is not enabled, the system
displays an error when you enter this command.
Cisco Nexus 5000 Series Command Reference
show startup-config vpc
10-5