Ssh6 - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

ssh6

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
ssh6
To create a Secure Shell (SSH) session using IPv6, use the ssh6 command.
Syntax Description
username
ipv6-address
hostname
vrf vrf-name
Command Default Default VRF.
Command Modes
EXEC mode
Command History Release
4.0(1a)N1(1)
Usage Guidelines
The switch supports SSH version 2.
Examples
This example shows how to start an SSH session using IPv6:
switch# ssh 2001:0DB8::200C:417A vrf management
Related Commands Command
clear ssh session
ssh
ssh server enable
Cisco Nexus 5000 Series Command Reference
6-128
ssh6 [username@]{ipv6-address | hostname} [vrf vrf-name]
(Optional) Username for the SSH session.
IPv6 address of the remote host.
Hostname of the remote host.
(Optional) Specifies the VRF name to use for the SSH session.
Modification
This command was introduced.
Description
Clears SSH sessions.
Starts an SSH session using IPv4 addressing.
Enables the SSH server.
Chapter 6 Security Commands
OL-16599-01