Match Access-Group - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 5 Quality of Service Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

match access-group

To identify a specified access control list (ACL) group as a match criteria for a class map, use the match
access-group command in the class map configuration mode. To remove ACL match criteria from a class
map, use the no form of this command.
Syntax Description
access-group
name acl-name
Defaults
None
Command Modes Class-map type qos configuration
Command History Release
4.1(3)N1(1)
Usage Guidelines
Note The permit and deny ACL keywords do not affect the matching of packets.
This command does not require a license.
Examples
This example shows how to create a qos class map that matches characteristics of the ACL my_acl:
switch(config)# class-map class_acl
switch(config-cmap-qos)# match access-group name my_acl
Related Commands Command
show class-map
OL-16599-01
match access-group name acl-name
no match access-group name acl-name
Matches on the characteristics in the ACL name specified.
Modification
This command was introduced.
Description
Displays class maps.
Cisco Nexus 5000 Series Command Reference
match access-group
5-5