Feature - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

feature

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
feature
To configure a feature in a user role feature group, use the feature command. To delete a feature in a
user role feature group, use the no form of this command.
Syntax Description
feature-name
Command Default None
Command Modes User role feature group configuration
Command History Release
4.0(0)N1(1a)
Usage Guidelines Use the show role feature command to list the valid feature names to use in this command.
Examples This example shows add features to a user role feature group:
switch(config)# role feature-group name SecGroup
switch(config-role-featuregrp)# feature aaa
switch(config-role-featuregrp)# feature radius
switch(config-role-featuregrp)# feature tacacs
This example shows how to remove a feature from a user role feature group:
switch(config)# role feature-group name MyGroup
switch(config-role-featuregrp)# no feature callhome
Related Commands Command
role feature-group
name
show role
feature-group
Cisco Nexus 5000 Series Command Reference
6-38
feature feature-name
no feature feature-name
The switch feature name as listed in the show role feature command output.
Modification
This command was introduced.
Description
Creates or configures a user role feature group.
Displays the user role feature groups.
Chapter 6 Security Commands
OL-16599-01