Show Npv Flogi-Table - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show npv flogi-table

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show npv flogi-table
To display the information about N port virtualization (NPV) FLOGI session, use the show npv
flogi-table command.
Syntax Description This command has no other keywords or arguments.
Command Default
None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Usage Guidelines
The show npv flogi-table command is available only when the switch is in NPV mode.
Examples The following example displays the information on NPV FLOGI session:
switch# show npv flogi-table
Related Commands Command
show npv status
Cisco Nexus 5000 Series Command Reference
9-34
show npv flogi-table
Modification
This command was introduced.
Description
Displays the NPV current status.
Chapter 9 Fibre Channel Show Commands
OL-16599-01