Show Processes Log - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

show processes log

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show processes log
To display the contents of the process log, use the show processes log command.
Syntax Description
details
pid process-id
Command Default Displays summary information for all processes on the device.
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples This example shows how to display summary information from the process log:
switch# show processes log
This example shows how to display detailed information from the process log:
switch# show processes log details
This example shows how to display detailed information from the process log for a specific process:
switch# show processes log pid 3632
Related Commands Command
show processes
show processes cpu
show processes
memory
Cisco Nexus 5000 Series Command Reference
1-96
show processes log [details | pid process-id]
(Optional) Displays detailed information from the process log.
(Optional) Displays detailed information from the process log for a specific
process. The process ID range is from 1 to 2147483647.
Modification
This command was introduced.
Description
Displays the process information for the switch.
Displays the CPU utilization information for processes.
Displays the memory allocation information for processes.
Chapter 1 Basic System Commands
OL-16599-01