Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual page 410

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

permit (IPv4)

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

syslog—System Logger (514)

tacacs—TAC Access Control System (49)

talk—Talk (517)

tftp—Trivial File Transfer Protocol (69)

time—Time (37)

who—Who service (rwho, 513)

xdmcp—X Display Manager Control Protocol (177)

This example shows how to configure an IPv4 ACL named acl-lab-01 with rules permitting all TCP and

UDP traffic from the 10.23.0.0 and 192.168.37.0 networks to the 10.176.0.0 network:

switch(config)# ip access-list acl-lab-01

switch(config-acl)# permit tcp 10.23.0.0/16 10.176.0.0/16

switch(config-acl)# permit udp 10.23.0.0/16 10.176.0.0/16

switch(config-acl)# permit tcp 192.168.37.0/16 10.176.0.0/16

switch(config-acl)# permit udp 192.168.37.0/16 10.176.0.0/16

Related Commands

ip access-list

show ip access-lists

Cisco Nexus 5000 Series Command Reference

Configures a deny rule in an IPv4 ACL.

Configures an IPv4 ACL.

Configures a remark in an ACL.

Displays all IPv4 ACLs or one IPv4 ACL.

Security Commands