Clock Timezone - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

clock timezone

To configure the time zone offset from Coordinated Universal Time (UTC), use the clock timezone
command. To revert to the default, use the no form of this command.
Syntax Description
zone-name
offset-hours
offset-minutes
Command Default None
Command Modes
Interface configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines Use the command to offset the device clock from UTC.
Examples
This example shows how to configure the time zone offset from UTC:
switch(config)# clock timezone PST -8 0
This example shows how to revert the time zone offset to the default:
switch# no clock timezone
Related Commands Command
show clock
OL-16599-01
clock timezone zone-name offset-hours offset-minutes
no clock timezone
Zone name. The name is a 3-character string for the time zone acronym (for
example, PST or EST).
Number of hours offset from UTC. The range is from –23 to 23.
Number of minutes offset from UTC. The range is from 0 to 59.
Modification
This command was introduced.
Description
Displays the clock time.
Cisco Nexus 5000 Series Command Reference
clock timezone
1-17