Clear Mac Dynamic - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Ethernet Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

clear mac dynamic

To clear dynamic entries from the forwarding table, use the clear mac dynamic command.

Syntax Description

address mac-addr

interface type slot/port (Optional) Specifies the interface for which MAC addresses should be

port-channel number

vlan vlan-id

Command Default

Command Modes

Command History

4.0(0)N1(1a)

This example shows how to clear all the dynamic entries from the MAC address table:

switch# clear mac dynamic

This example shows how to clear a dynamic entry for VLAN 2 from the MAC address table:

switch# clear mac dynamic address 001b.2106.58bc vlan 2

This example shows how to clear all dynamic entries for VLAN 2 from the MAC address table:

switch# clear mac dynamic vlan 2

Related Commands

show mac dynamic

clear mac dynamic [address mac-addr] | [interface {type slot/port | port-channel number}] [vlan

(Optional) Specifies the MAC address to remove from the table. Use the

format EEEE.EEEE.EEEE.

removed from the table. The type can be either ethernet. Specify the

appropriate slot or virtual interface group number and port number.

(Optional) Specifies the EtherChannel for which MAC addresses should be

removed from the table. Use the EtherChannel number.

(Optional) Specifies the VLAN from which MAC addresses should be

removed from the table. The range of valid values is from 1 to 4094.

Modification

This command was introduced.

Displays the dynamic addresses in the MAC address table.

Cisco Nexus 5000 Series Command Reference

clear mac dynamic