Aaa Authentication Login Mschap Enable - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

aaa authentication login mschap enable

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
aaa authentication login mschap enable
To enable Microsoft Challenge Handshake Authentication Protocol (MSCHAP) authentication at login,
use the aaa authentication login mschap enable command. To revert to the default, use the no form of
this command.
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to enable MSCHAP authentication:
switch(config)# aaa authentication login mschap enable
This example shows how to disable MSCHAP authentication:
switch(config)# no aaa authentication login mschap enable
Related Commands Command
show aaa
authentication
Cisco Nexus 5000 Series Command Reference
6-8
aaa authentication login mschap enable
no aaa authentication login mschap enable
Modification
This command was introduced.
Description
Displays the status of MSCHAP authentication.
Chapter 6 Security Commands
OL-16599-01