Untagged Cos - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)

Hide thumbs Also See for AP775A - Nexus Converged Network Switch 5010:

Table of Contents

Quality of Service Commands

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

untagged cos

Ethernet frames received with no CoS value are given a CoS value of 0. To override this value for the

selected interface, use the untagged cos command.

Syntax Description

Command Default

Command Modes

Interface configuration mode

Command History

4.0(1a)N1(1)

Usage Guidelines

No license required for the command.

This example shows how to set the CoS value to 4 for untagged frames received on an interface:

switch# configure terminal

switch(config)# interface ethernet 1/2

switch(config-if)# untagged cos 4

Related Commands

untagged cos cos-value

Specifies a Class of Service (CoS) value for untagged frames. Values can

range from 1 to 7.

Modification

This command was introduced.

Sets the CoS value to match for the selected class.

Cisco Nexus 5000 Series Command Reference

untagged cos