Rscn Distribute - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 8 Fibre Channel Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

rscn distribute

To enable distribution of a Registered State Change Notification (RSCN) configuration, use the rscn
distribute command. To disable the distribution, use the no form of the command.
Syntax Description
This command has no arguments or keywords.
Command Default RSCN timer distribution is disabled.
Command Modes Configuration mode
Command History Release
4.0(0)N1(1a)
Usage Guidelines The RSCN timer configuration must be the same on all switches in the VSAN. Cisco Fabric Service
(CFS) automatically distributes the RSCN timer configuration to all switches in a fabric. Only the RSCN
timer configuration is distributed.
Examples
The following example enables the distribution of an RSCN configuration:
switch(config)# rscn distribute
Related Commands Command
rscn abort
rscn commit
rscn event-tov
clear rscn session
show rscn
OL-16599-01
rscn distribute
no rscn distribute
Modification
This command was introduced.
Description
Cancels a pending RSCN configuration on a specified VSAN.
Applies a pending RSCN configuration.
Configures an RSCN event timeout.
Clears the RSCN session for a specified VSAN.
Displays RSCN configuration information.
Cisco Nexus 5000 Series Command Reference
rscn distribute
8-125