Show Startup-Config - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 1 Basic System Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show startup-config

To display the startup configuration, use the show startup-config command.
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(0)N1(1a)
Examples
This example shows how to display the startup configuration:
switch# show startup-config
Related Commands Command
copy running-config
startup-config
show running-config
show running-config
diff
OL-16599-01
show startup-config
Modification
This command was introduced.
Description
Copies the running configuration to the startup configuration.
Displays the running-configuration.
Displays the differences between the running configuration and the startup
configuration.
Cisco Nexus 5000 Series Command Reference
show startup-config
1-103