Attach Fex - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

attach fex

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
attach fex
To access the CLI of a connected Fabric Extender to run diagnostic commands, use the attach fex
command.
Syntax Description chassis_ID
Command Default
None
Command Modes EXEC mode
Command History Release
4.0(1a)N2(1)
Usage Guidelines
Use the attach fex command to access the CLI on a connected Fabric Extender and performing
diagnostic commands. We recommend that you use this command only following direction from Cisco
technical support personnel.
Examples
This example shows how to access the CLI of a connected Fabric Extender to run diagnostic commands:
switch# attach fex 101
Related Commands Command
show fex
Cisco Nexus 5000 Series Command Reference
4-2
attach fex chassis_ID
Fabric Extender chassis ID. The chassis ID range is from 100 to 199.
Modification
This command was introduced.
Description
Displays all configured Fabric Extender chassis connected to the switch.
Chapter 4 Fabric Extender Commands
OL-16599-01