Show Fctimer - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show fctimer

To view the Fibre Channel timers (fctimer), use the show fctimer command.
Syntax Description vsan vsan-id
d_s_tov
e_d_tov
f_s_tov
r_a_tov
last action status
pending
pending-diff
session status
status
Command Default None
Command Modes
EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays configured global TOVs:
switch# show fctimer
The following example displays configured TOVs for a specified VSAN:
switch# show fctimer vsan 10
Related Commands Command
fctimer
OL-16599-01
show fctimer [d_s_tov [vsan vsan-id] | e_d_tov [vsan vsan-id] | f_s_tov [vsan vsan-id] | r_a_tov
[vsan vsan-id] | last action status | pending | pending-diff | session status | status | vsan
vsan-id]
(Optional) Displays information for a VSAN. The range is 1 to 4093.
(Optional) Displays the distributed services time out value (D_S_TOV) in
milliseconds.
(Optional) Displays the error detection time out value (E_D_TOV) in
milliseconds.
(Optional) Displays the fabric stability time out value (F_S_TOV) in
milliseconds.
(Optional) Displays the resource allocation time out value (R_A_TOV) in
milliseconds.
(Optional) Displays the status of the last CFS commit or discard operation.
(Optional) Displays the status of pending fctimer commands.
(Optional) Displays the difference between pending database and running
config.
(Optional) Displays the state of fctimer CFS session.
(Optional) Displays the Fibre Channel timer status.
Modification
This command was introduced.
Description
Configures fctimer parameters.
Cisco Nexus 5000 Series Command Reference
show fctimer
9-27