Device-Alias Name - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

device-alias name

S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
device-alias name
To configure device names in the device alias database, use the device-alias name command. To remove
device names from the device alias database, use the no form of the command.
Syntax Description
device-name
pwwn pwwn-id
Command Default None
Command Modes Device alias database configuration mode
Command History Release
Release 4.0
Examples The following example shows how to configure a device name alias entry in the device name database:
switch(config)# device-alias database
switch(config-device-alias-db)# device-alias name Device1 pwwn 21:00:00:20:37:6f:db:bb
Related Commands Command
device-alias database
show device-alias
Cisco Nexus 5000 Series Command Reference
8-32
device-alias name device-name pwwn pwwn-id
no device-alias name device-name
Specifies the device name. Maximum length is 64 characters.
Specifies the pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h
is a hexadecimal number.
Modification
This command was introduced.
Description
Enters device alias database configuration mode.
Displays device alias database information.
Chapter 8 Fibre Channel Commands
OL-16599-01