Show Zone Analysis - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual

Chapter 9 Fibre Channel Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m

show zone analysis

To display detailed analysis and statistical information about the zoning database, use the show zone
analysis command.
Syntax Description active
vsan vsan-id
zoneset name
Command Default None
Command Modes EXEC mode.
Command History Release
4.0(0)N1(1a)
Examples The following example displays detailed statistics and analysis of the active zoning database:
switch# show zone analysis active vsan 1
The following example displays detailed statistics and analysis of the full zoning database:
switch# sh zone analysis vsan 1
Zoning database analysis vsan 1
OL-16599-01
show zone analysis {active vsan vsan-id | vsan vsan-id | zoneset name vsan vsan-id}
Displays analysis information for the active zone set.
Displays analysis information for the specified VSAN ID. The range is 1 to
4093.
Displays zone set analysis information for the specified zone set.
Modification
This command was introduced.
Full zoning database
Last updated at: 14:36:56 UTC Oct 04 2005
Last updated by: Local [CLI / SNMP / GS / CIM / INTERNAL] or
Merge [interface] or
Remote [Domain, IP-Address]
Num zonesets: 1
Num zones: 1
Num aliases: 0
Num attribute groups: 0
Formatted database size: < 1 Kb / 2000 kb ( < 1% usage)
Unassigned zones:
zone name z1 vsan 1
[Switch name]
Cisco Nexus 5000 Series Command Reference
show zone analysis
9-53