Show Spanning-Tree Vlan - Cisco AP775A - Nexus Converged Network Switch 5010 Command Reference Manual
Cisco nexus 5000 series command reference, release 4.1(3)n1(1) (ol-16599-01, august 2009)
Hide thumbs
Also See for AP775A - Nexus Converged Network Switch 5010:
- Configuration manual (1486 pages) ,
- Reference (886 pages) ,
- Release note (26 pages)
Table of Contents
Advertisement
Chapter 3
Ethernet Show Commands
S e n d c o m m e n t s t o n x 5 0 0 0 - d o c f e e d b a c k @ c i s c o . c o m
show spanning-tree vlan
To display STP information for specified VLANs, use the show spanning-tree vlan command.
Syntax Description
vlan-id
active
brief
detail
blockedports
bridge
address
forward-time
hello-time
id
max-age
priority
system-id
protocol
OL-16599-01
show spanning-tree vlan {vlan-id} [active [brief | detail]]
show spanning-tree vlan {vlan-id} [blockedports]
show spanning-tree vlan {vlan-id} [bridge [address] | brief | detail | forward-time | hello-time |
id | max-age | priority [system-id] | protocol]
show spanning-tree vlan {vlan-id} [brief [active]
show spanning-tree vlan {vlan-id} [detail [active]]
show spanning-tree vlan {vlan-id} [inconsistentports]
show spanning-tree vlan {vlan-id} [interface {interface slot/port | port-channel number} [active
[brief | detail]] | brief [active] | cost | detail [active] | edge | inconsistency | priority | rootcost
| state]]
show spanning-tree vlan {vlan-id} [root [address | brief | cost | detail | forward-time | hello-time
| id | max-age | port | priority [system-id]]
show spanning-tree vlan {vlan-id} [summary]
Specifies the VLAN or range of VLANs that you want to display.
(Optional) Displays information about STP VLANs and active ports.
(Optional) Displays brief summary of STP information for the specified
VLANs.
(Optional) Displays detailed STP information for the specified VLANs.
(Optional) Displays the STP alternate ports in the blocked state for the
specified VLANs.
(Optional) Displays the status and configuration of the bridge for the
specified VLANs.
(Optional) Displays the MAC address for the specified STP bridge for the
specified VLANs.
(Optional) Displays the STP forward delay interval for the bridge for the
specified VLANs.
(Optional) Displays the STP hello time for the bridge for the specified
VLANs.
(Optional) Displays the STP bridge identifier for the specified VLANs.
(Optional) Displays the STP maximum-aging time for the specified VLANs.
(Optional) Displays the STP priority for the specified VLANs.
(Optional) Displays the bridge identification with the system ID added for
the specified VLANs.
(Optional) Displays which STP protocol is active on the switch.
show spanning-tree vlan
Cisco Nexus 5000 Series Command Reference
3-33
Advertisement
Table of Contents
